Impulsive entries· Entry Control
How do I stop jumping in on impulse?
ENTRY CONTROL
Ahead of time, you set the checks you make before every entry: one to five steps, named by you.
Until they are all done, no new entry gets in.
A step can have a waiting time, and it cannot be completed before it has passed: no clicking through your routine in seconds.
In this example
- 1 Confirm uptrend · 1 min wait
- 2 Tier II bar above the EMA
It tempts you. Entry Control asks for your routine first.
Hot, you see a breakout. Cool, you see a trap.
An uptrend forms: now there is something to confirm.
Step 1 counts in one minute.
Stay on the chart: trading is serious work, and one distraction can make you miss your moment.
Step 1 done. Now, your Tier II bar above the EMA.
Steps done: your trading window opens.
Your entry, by the rules you set.
Flat again: your routine starts over.
Your routine first. Then your entry.
Before you watch
Risk Disclosure: Futures and forex trading contains substantial risk and is not for every investor. An investor could potentially lose all or more than the initial investment. Risk capital is money that can be lost without jeopardizing ones' financial security or life style. Only risk capital should be used for trading and only those with sufficient risk capital should consider trading. Past performance is not necessarily indicative of future results.
Hypothetical Performance Disclosure: Hypothetical performance results have many inherent limitations, some of which are described below. No representation is being made that any account will or is likely to achieve profits or losses similar to those shown; in fact, there are frequently sharp differences between hypothetical performance results and the actual results subsequently achieved by any particular trading program. One of the limitations of hypothetical performance results is that they are generally prepared with the benefit of hindsight. In addition, hypothetical trading does not involve financial risk, and no hypothetical trading record can completely account for the impact of financial risk of actual trading. for example, the ability to withstand losses or to adhere to a particular trading program in spite of trading losses are material points which can also adversely affect actual trading results. There are numerous other factors related to the markets in general or to the implementation of any specific trading program which cannot be fully accounted for in the preparation of hypothetical performance results and all which can adversely affect trading results.
Press play below to watch.
Go deeper
01
What it is
Your own routine, before every new entry.
Entry Control turns the checks you make before trading into a routine NinjaGuard enforces. Until you've completed it, no new entry gets in.
- Your steps
- One to five checks, each with the name you give it: “Confirm uptrend”, “Check the news”, whatever your routine is. A step can carry a waiting time, and it can’t be completed before that time has passed, so the routine can’t be clicked through in seconds.
- Going back a step
- If the market changes context after you confirmed a step, that step no longer validates anything. Double-click Steps to go back one step and confirm it again, even while it still counts its wait. The steps before it stay completed.
- Your trading window
- Completing your last step opens it. You choose its limit: a time, or a number of entry intentions. On the panel it shows as “Supervisor”, with what’s left.
- Entry intentions
- What the window counts: orders, not contracts. A 5-contract order is one entry intention; an ATM’s stop and target are none. One is used only when it fills: cancel it before, and you get it back.
- Market Biasoptional
- The only direction you allow, Long or Short. Fix it in Settings, or pick it during one of your steps. NinjaGuard then lets you open only that way.
- Signal Bar Gateoptional
- NinjaGuard scores the last closed candle from Tier I to IV, and lets you in only if it reaches the tier you require. Fix the tier in Settings, or pick it during one of your steps. Before you click, it shows on screen whether it would let you in, and on which side.
- Getting out is always yours
- Close, cancel, reduce, at any moment. Entry Control never closes a position for you.
- The cycle
- When the window runs out, no new entries. Once you’re flat with no orders, your steps start over. It belongs to the account and the instrument, not to the chart.
Your steps
Optional waits. Market Bias and Signal Bar Gate can be picked here.
Double-click Steps
Back one step, to confirm it again.
last step done
Trading window
A time, or a number of entry intentions.
runs out
No new entries
Getting out is always allowed.
flat, no orders
Back to your steps
02
Set it up
In Settings, open Entry Control and tick Enable Entry Control. Then, top to bottom:
Validation Steps
Your steps: one to five, each with its name and its waiting time, in seconds or minutes. A wait at 0 means no wait. Add Step adds one, until there are five; the ✕ removes it.
Validation Reset
This is your trading window. Time: it stays open for the Validation Timeout you pick, from 15 seconds to 30 minutes. Entry Count: it allows the Max Accepted Entries you set, counted in entry intentions.
Market Bias
Tick Enable Market Bias, then pick its mode. Fixed: always the direction you choose, Long Only or Short Only. Dynamic: the step you pick in Ask During Step asks you for the direction, and it can’t be confirmed until you choose one.
Signal Bar Gate
Tick Enable Signal Bar Gate. It looks at the last closed bar only, and lets you in only if it reaches the quality you require.
Fixed: always the same quality. Tier I Only, or Tier II, III or IV Or Better; Tier I is the highest. The button beside each tier shows an example of its candles.
Dynamic: the step you pick in Ask During Step asks you for the tier, and it can’t be confirmed until you choose one.
In both modes: Signal Strictness, in five levels from Permissive to Strict+, and Avoid Doji Bars. With Avoid Doji Bars on, a doji never lets you in.
OK or Apply saves your changes, and only while the account is flat with no working orders.
03
On your chart
Everything Entry Control tells you is on NinjaGuard’s panel in Chart Trader, and everything you do starts from its Steps button.
Waiting for steps
Until your routine is done, the panel says WAITING FOR STEPS, and no new entry gets in. Your steps are behind the Steps button, at the bottom of the panel.
Doing a step
Click Steps: a dialog shows the step, its number and its name. Confirm completes it, the ring around the button fills as you go, and every step that completes beeps once.
A step with a waiting time, once confirmed, completes by itself when the time is up. Meanwhile the button pulses softly; hover it to see the step and the time left.
Going back a step
The market moves on after you confirm a step. If it changes context, that step no longer validates anything: don’t carry it into your trading window. Go back and confirm it again.
Double-click Steps to go back one step, even one still counting its wait. The steps before it stay completed. If that step is where you picked the direction or the tier, the choice is cleared, and you pick it again when you confirm the step again.
Once your window is open, you can still step back, but only when you’re flat with no orders.
✓ Confirm uptrend done Double-click Steps
↺ Confirm uptrend to confirm again Dynamic steps
If Market Bias or Signal Bar Gate is set to Dynamic, its step asks you first: the direction, Long or Short, or the minimum signal quality, from Tier I to Tier IV. The step can’t be confirmed until you choose.
Your window, open
Your last step done, the dialog says so: Entry validation complete, Supervisor Active. The panel turns to TRADING ENABLED, and its Supervisor line shows what’s left of your window: entry intentions or time.
With Market Bias and Signal Bar Gate on, the same line also shows the direction and the tier you require.
Blocked, and Signal Bar Gate
When Entry Control stops an order, the panel turns orange for a moment and says so: BLOCKED BY ENTRY CONTROL.
With Signal Bar Gate on, the headline tells you before you click: WAITING FOR TIER I SB while the last closed bar falls short of your tier, TRADING ENABLED · LONG or · SHORT when it would let you in, and on which side.
Starting from zero
Hold Steps for two seconds and confirm to reset the whole cycle. While your window is open, it only works when you’re flat with no orders; once the window has run out, there’s no resetting it by hand.
04
How it works
What counts
Your window counts entry intentions, not contracts. A 5-contract order is one; an ATM’s stop and target are none. One is used only when it fills: cancel an order before it fills, and you get its entry intention back.
- Buy 5 contracts→1 entry intention
- The ATM’s stop and target→0
- Cancelled before it fills→given back
When the window runs out
No new entry intentions, and no adding to the ones you have. Orders you placed while it was open keep working, and can still fill.
Window open Window over An order you placed while it was open ✓ placed ✓ keeps working, can still fill A new entry ✓ allowed ✕ blocked Adding to your position ✓ allowed ✕ blocked Getting out, always
Close, cancel and reduce, at any moment: Entry Control never stops you from getting out, and never closes your position on its own. Market Bias never blocks an exit either.
Always
✓ Close
✓ Cancel
✓ Reduce
Until your steps are done, and once the window is over
✕ New entry
✕ Adding to it
Starting over
Only once you’re flat with no orders does the cycle start over, back to your steps. Once the window has run out, there’s no resetting it by hand.
One cycle per account and instrument
The cycle belongs to the account and the instrument, not to the chart: closing a chart doesn’t erase your validation, and opening two charts doesn’t give you two permissions.
Chart 1ES 12-26Chart 2ES 12-26
↓
One cycleSim101 · ES 12-26
05
Good to know
- Orders from Chart Trader, the chart’s menu and One Click
- Entry Control checks the orders you send from Chart Trader’s Buy and Sell buttons, from the chart’s order menu — Limit, Stop, Stop Limit and MIT orders — and from One Click. Orders from strategies, NinjaScripts and third-party add-ons don’t go through it before they’re sent. Once they’re in the market, NinjaGuard does count them and applies its rules to them.
- The Rev button
- Chart Trader’s Rev button is not supported.
- Signal Bar Gate needs a candle chart
- It needs a Candlestick, OHLC or Equivolume chart of the same instrument. On any other chart type it blocks entries and says so on screen: CANDLE CHART REQUIRED.
- Restarting NinjaTrader
- If NinjaTrader is closed and reopened while your window is open, the window is not restored. If you were flat, orders that would open a position are cancelled and you go back to your last step. If you had a position, pending entries are cancelled and only exits and protection are kept.
- Reversing after the window
- Once the window has run out, an order that would close your position and open the opposite one is reduced to only closing.
- No steps, fixed controls
- With no steps but Market Bias or Signal Bar Gate set to Fixed, Entry Control applies that direction or that tier all the time, with no steps and no window limit.
- Copier slave accounts
- Entry Control is off on Copier slave accounts.